3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA

Soldering Stations – 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA

Appreciate going to these pages. For any individual who is trying to find the very best Soldering Stations products and trusted, we advise 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA as the right choice for you to have a budget-friendly cost and great quality. To ensure you get the maximum gain from this item, following an evaluation of 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA.

Features and Specifications: 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA

  • Comes with either Yihua or Mark Ethan Branding – Very Fast Heat Up process with very accurate and Stable Temperature Control by Samsung Chip Microchip
  • 1- Soldering Station w/ 10 iron Tips & 1 Hot Air Blower w/ 4 Nozzles soldering wick
  • Air Flow: 120 L/ Minute from the Hot Air Gun- brushless fan makes a very gentle wind
  • Soldering iron and Hot air gun can be used simultaneously if needed.
  • ESD Safe. Iron is Anti Static design. Digital LED Displays. Low Noise

Digital LED displays — Analog Meter Functions can be used simultaneously or independently Overtemp and over load protection by short circuit Intelligence. Advanced SMD technology for stable temperature control.

Cool air flow to extend life of the hot air gun and ensure safe operation

Iron Gun: 60 watts Temperature control between 200C – 480C degrees C Celsius Temperature stable and accurate within 5 degrees C Tip Ground Voltage: < 2mV Tip Ground Impedance: < 2ohm Resistant heat material – Nichrome ESD design. Great for soldering and desodering SOIC, CHIP, QFP, PLCC, BGA,SMD,etc

Mobile signal strength auto recovery is very compact while providing all the needed 3 functions. All 3 functions can be used simultaneously or independently if needed.

Hot Air Gun: 800 watts Temperature control between 90 Degrees C – 480 degrees F Temperature accurate within 4-5 degrees- Temperature is stable Brushless ball fan 25mm hand piece size DC Power Supply: Output Voltage:: DC 1V ~ 15V Load Stability: < 0.01 ± 2mV Temperature Coefficient: < 300ppm/degree C Ripple dB: < 1mvrms (Virtual Value) Protection Current: 1A Package Includes: Main Unit Hot Air Gun Hot Iron w/ 900M-T-I Tip Plastic Stand w/ sponge Steel Holder Desoldering. Digital PID technology to enhance temp stability. Great for heating shrink, paint drying, adhesive removal, thawing,warming,plastic welding.

4x Nozzles Included- sizes– 11 Tips Included (10 in packet and 1 already in iron). 3 Prong Grounded Power Cord. Plug and play ready to operate upon arrival.

You can get the internet and then the details about 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA to obtain supplemental proportionate, start to see the most recent price tag, browse reviews with consumers who have obtained this product, along with you’ll be able to choose option similar item before you decide to opt to decide to buy.

If you have an interest in purchasing the 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA, make certain you purchase the very best quality items at special rates. Before you purchase make sure you purchase it at the store that has a great reputation and good service. Thank you for visiting this page, we hope it can help you to acquire info of 3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA.